8devices Community https://www.8devices.com/community/ |
|
Carambola nano https://www.8devices.com/community/viewtopic.php?f=1&t=113 |
Page 8 of 12 |
Author: | Gerd [ 16 Nov 2012, 12:39 ] |
Post subject: | Re: Carambola nano |
Are there any news regarding the Carambola Nano ? As far as I understand you have developed a AR9331 based board which is a little bit smaller than the existing Carambola. What about the Ralink RT5350 based Nano ? IMHO there is a lot of OpenWRT progress last weeks. The RT5350 drain slightly more power than AR9331 but has more peripherals (second UART, SPI, I2C ...) I would like to welcome both variants: AR9331 for power sensitive applications and RT5350 for connecting other things. Is the development of the RT5350 still alive or on hold ? Kind regards Gerd |
Author: | vvmaks [ 18 Nov 2012, 20:47 ] |
Post subject: | Re: Carambola nano |
I sent an email about this to 8devices, and haven't received a reply. Can someone please respond? |
Author: | gedass [ 19 Nov 2012, 07:55 ] |
Post subject: | Re: Carambola nano |
Author: | bluespray [ 29 Nov 2012, 15:32 ] |
Post subject: | Re: Carambola nano |
Any release date for carambola 2? |
Author: | gedass [ 29 Nov 2012, 20:31 ] |
Post subject: | Re: Carambola nano |
Author: | Socrates [ 03 Jan 2013, 20:38 ] |
Post subject: | Re: Carambola nano |
AR9331 datasheet: http://www.yuxict.com/Upload/download/1 ... asheet.pdf |
Author: | dasMopo [ 07 Jan 2013, 21:23 ] |
Post subject: | Re: Carambola nano |
That's quite interesting news. Any more specific information available ? (I'm aware the official data sheet is held under NDA, but maybe you could share info about interfaces, number of gpios, dev board and module availability and pricing, etc.) |
Author: | gedass [ 08 Jan 2013, 08:03 ] | ||
Post subject: | Re: Carambola nano | ||
16MB flash, 64MB RAM, 2x Ethernet, WiFi +21 dBm b/g/n , serial port, USB host/slave, SPI, 23x GPIO
|
Author: | Socrates [ 08 Jan 2013, 09:08 ] |
Post subject: | Re: Carambola nano |
AR9331 SDK available anywhere? |
Page 8 of 12 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |