I have just checked. If you follow instructions http://www.8devices.com/wiki_carambola/ ... e_to_start and http://www.8devices.com/wiki_carambola/ ... mbola_luci you should be able to connect to LUCI once firmware is flashed.

Hi everybody,
the buzzword is flashing

I updated the image via bootloader with tftp into RAM. I thought this would be the same as flashing the image.
But i was wrong! After finaly selected the LUCI Package (btw. what is LUCI2? it is shown in my menuconfig) via feeds-command.
I could see, that is was compiled successfully.
Cause of loading the new image to ram, /www was always empty.
The after lots of tests, i flashed the image. Everything was ok!

Kind regards,
Joerg

I have this problem when i try to compile the kernel binary, is there any way to fix it? Thanks.

Download failed.
--2012-11-23 12:59:42-- http://downloads.openwrt.org/sources/xz-5.0.4.tar.bz2
Resolving downloads.openwrt.org... 78.24.191.177
Connecting to downloads.openwrt.org|78.24.191.177|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-11-23 12:59:42 ERROR 404: Not Found.

Download failed.
No more mirrors to try - giving up.
make[3]: *** [/home/adan/carambola/dl/xz-5.0.4.tar.bz2] Error 2
make[3]: Leaving directory `/home/adan/carambola/tools/xz'
make[2]: *** [tools/xz/compile] Error 2
make[2]: Leaving directory `/home/adan/carambola'
make[1]: *** [/home/adan/carambola/staging_dir/target-mipsel_r2_uClibc-0.9.33.2/stamp/.tools_install_nnnnn] Error 2
make[1]: Leaving directory `/home/adan/carambola'
make: *** [world] Error 2