8devices Community https://www.8devices.com/community/ |
|
No working image. https://www.8devices.com/community/viewtopic.php?f=1&t=456 |
Page 1 of 2 |
Author: | aaryak [ 08 Jul 2013, 08:36 ] |
Post subject: | No working image. |
I build the image following the wiki , step by step. I have done it 3 times now. but the image build after doing every thing as told , is not working. AP121-2MB (ar9330) U-boot DRAM: sri ar7240_ddr_initial_config(145): python ddr init #### TAP VALUE 1 = f, 2 = 10 64 MB Top of RAM usable for U-Boot at: 84000000 Reserving 212k for U-Boot at: 83fc8000 Reserving 192k for malloc() at: 83f98000 Reserving 44 Bytes for Board Info at: 83f97fd4 Reserving 36 Bytes for Global Data at: 83f97fb0 Reserving 128k for boot params() at: 83f77fb0 Stack Pointer at: 83f77f98 Now running in RAM - U-Boot at: 83fc8000 Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 flash size 16777216, sector count = 256 Flash: 16 MB In: serial Out: serial Err: serial Net: ag7240_enet_initialize... No valid address in Flash. Using fixed address No valid address in Flash. Using fixed address : cfg1 0x5 cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up : cfg1 0xf cfg2 0x7214 eth1: 00:03:7f:09:0b:ad athrs26_reg_init_lan ATHRS26: resetting s26 ATHRS26: s26 reset done eth1 up eth0, eth1 Hit any key to stop autoboot: 0 ## Booting image at 9f050000 ... Image Name: MIPS OpenWrt Linux-3.3.8 Created: 2013-07-08 7:57:42 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 855633 Bytes = 835.6 kB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum at 0x9f050040 ...OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in bytes, 67108864 Starting kernel ... it just hangs here. do i need to do anything else apart from following the wiki? |
Author: | hutorny [ 21 Jul 2013, 09:33 ] |
Post subject: | Re: No working image. |
Author: | hutorny [ 22 Jul 2013, 07:56 ] |
Post subject: | Re: No working image. |
Author: | Top-Dog [ 17 Mar 2014, 22:17 ] |
Post subject: | Re: No working image. |
Hi guys. Unfortunately, I have also fallen into this same trap with my new Carambola2 module. Is there a way to get the correct *.bin image back onto the module, and get it working again? Again, my module just hangs at the "Starting kernel ..." message, but I can press the "Esc" key to stop autoboot and from there it seems like it may be possible to load a new image (using something like "loady" - but I'd like better instructions on the correct way to proceed). Any help would be appreciated. |
Author: | gedass [ 18 Mar 2014, 06:04 ] |
Post subject: | Re: No working image. |
Hi, bin images lives there: http://pkg.8devices.com/ |
Author: | Top-Dog [ 18 Mar 2014, 06:28 ] |
Post subject: | Re: No working image. |
Cheers, where did you get that link from? Also, do you know how to upload and build the new image (is it the same)? It seems that it is possible (http://mark.mckillen.com/2014/01/mis-ad ... l-wr741nd/) in U-boot, but I have no idea what a TFTP server is and how to configure it. Will '#git clone https://github.com/8devices/carambola2' get the latest files as well? I've tried '#git tag -l' and it didn't return anything showing the version of the files that were cloned. |
Author: | gedass [ 18 Mar 2014, 07:07 ] | ||
Post subject: | Re: No working image. | ||
|
Author: | Top-Dog [ 18 Mar 2014, 09:16 ] |
Post subject: | Re: No working image. |
Ok. And, how does one go about loading that image from U-boot? |
Author: | gedass [ 18 Mar 2014, 10:44 ] |
Post subject: | Re: No working image. |
http://8devices.com/wiki_carambola/doku ... ftp_server http://8devices.com/wiki_carambola/doku ... d_firmware |
Author: | Top-Dog [ 18 Mar 2014, 12:27 ] |
Post subject: | Re: No working image. |
Yea, I tried to follow that page, but I'm not sure what some of the parameters should be set to. Do you have a screenshot of the "DHCP" tab in the TFTP32 program? Then once that is up and running how would I proceed (the menus I have don't match the ones shown here http://8devices.com/wiki_carambola/doku ... grade:tftp). Also the instructions here (http://mark.mckillen.com/2014/01/mis-ad ... l-wr741nd/) aren't for the carambola explicitly, so what needs to change for the carambola2? A little bit of an explanation would be really helpful. Thanks |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |