8devices Community https://www.8devices.com/community/ |
|
carambola 2 JTAG https://www.8devices.com/community/viewtopic.php?f=13&t=406 |
Page 1 of 2 |
Author: | tavish [ 18 May 2013, 07:40 ] |
Post subject: | carambola 2 JTAG |
Hi Can carambola2 be unbricked using Openocd+JTAG? There doesnt seem to be any jtag config for ar9331 present with openocd. |
Author: | matzem [ 04 Jun 2013, 11:36 ] |
Post subject: | Re: carambola 2 JTAG |
any new information |
Author: | tty [ 08 Jun 2013, 07:42 ] |
Post subject: | Re: carambola 2 JTAG |
Taking into account this topic: viewtopic.php?f=5&t=421 there is no need OpenOCD & JTAG to unbrick carambola2. SPI FLASH chip can easily be programmed by the pins of J13 connector of the development board. J13 pin10 - GND J13 pin11 - SPI_CS ( to GND) J13 pin12 - SPI_CLK J13 pin13 - SPI_MOSI J13 pin14 - SPI_MISO J13 pin15 - RESET ( to GND) J13 pin16 - 3.3V |
Author: | tavish [ 11 Jun 2013, 06:24 ] |
Post subject: | Re: carambola 2 JTAG |
Thanks for the reply! |
Author: | tavish [ 13 Jun 2013, 12:33 ] |
Post subject: | Re: carambola 2 JTAG |
Author: | matzem [ 13 Jun 2013, 12:58 ] |
Post subject: | Re: carambola 2 JTAG |
do you have a bricked carambola2 combo (dev+module) or only a module? |
Author: | tavish [ 13 Jun 2013, 14:02 ] |
Post subject: | Re: carambola 2 JTAG |
I have a development kit and module combo |
Author: | tty [ 13 Jun 2013, 20:28 ] |
Post subject: | Re: carambola 2 JTAG |
Author: | tavish [ 14 Jun 2013, 08:43 ] |
Post subject: | Re: carambola 2 JTAG |
Author: | zorromymy [ 09 Sep 2013, 16:08 ] |
Post subject: | Re: carambola 2 JTAG |
Page 1 of 2 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |