Hi guys,

I just opened the box , and tried to access the openwrt config webpage on 192.168.1.1

but...it is not working

The ethernet ports work...well at list the dhcp one eth1.

the problem:

I don have wireless
ifconfig -a
br-lan Link encap:Ethernet HWaddr C4:93:00:00:3E:03
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:4512 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:215273 (210.2 KiB) TX bytes:0 (0.0 B)

eth0 Link encap:Ethernet HWaddr C4:93:00:00:3E:03
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:4512 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:278441 (271.9 KiB) TX bytes:0 (0.0 B)
Interrupt:5

eth1 Link encap:Ethernet HWaddr C4:93:00:00:3E:05
inet addr:192.168.10.53 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:2874 errors:0 dropped:1 overruns:0 frame:0
TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:212651 (207.6 KiB) TX bytes:4257 (4.1 KiB)
Interrupt:4

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:71 errors:0 dropped:0 overruns:0 frame:0
TX packets:71 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7477 (7.3 KiB) TX bytes:7477 (7.3 KiB)

Does I need to load any software , any kernel module for wireless??
Another question...the ethernet ports have the green led always on, it showd be off , and only when the port is connect will come on...

Thanks in advance
tux

Hi,

Don't ask me how...the problem is solved

regards
tux