hi guys...
My Carambola 2 arrived more or less two weeks ago...
I noticed that it comes pre-configured with eth1(wan), and a bridge(br0) for eth0+wlan0.
------------------------------------------------------------------------------
I want this scenario...
https://cld.pt/dl/download/0caff1c1-13d ... etwork.pngIn this way I have.
eth0 192.168.10.1/24 for network 192.168.10.0/24
eth1 192.168.1.2/30 for internet
wlan0 192.168.100.1 for wireless network 192.168.100.0/24
-----------------------------------------------------------------------------------
default gateway of carambola2 is the WAN eth0 router
-----------------------------------------------------------------------------------
in network 192.168.10.0/24 I have a DHCP and DNS servers, which I want to maintain only for that network..
So I end with a DHCP and DNS severs that will stay in Carambola2 and will only serve the wireless network(192.168.100.0/24)
------------------------------------------------------------------------------------
Reconfigured all the interfaces in the web interface of carambola2...
I added a default gateway for eth1 of router WAN...all the interfaces have been configured with this default gateway...is this problematic?
Now my carambola knows how to send packets from/two my internal networks...
for the packages that goes from my networks to the outside...they go trough the gateway...
the packages that come from WAN to my network(two static route rules in router WAN send to eth1 of carambola)..i don't know if they are routed to the right place(in carambola2)..??this is one problem...and if I try to acess router WAN eth0 from my nets, I have problems :S
the third problem is that...I can't use the wireless in this configuration...and I don't know why...in the pre-configured config, I was able to use it...but now, a client stays some time trying and fail
Maybe the problem is related to DHCP server...
How can I configure DHCP/DNS server only for wireless(192.168.100.0/24) network?
any body knows...sorry the question...is too long, but if any body can help, I appreciate since I am testing Carambola2 for a target project, I am thinking in buying dozens of them to the project...but only if it works for my config...
thanks in advance
regards
tux