Hi,
When I try and activate WIFI in AP mode on the Carambola2 the device reboots as per below:
[ 23.940000] cfg80211: Calling CRDA for country: ZA
[ 23.950000] cfg80211: Regulatory domain changed to country: ZA
[ 23.950000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.960000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.970000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 23.970000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.980000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.990000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 26.090000] device wlan0 entered promiscuous mode
[ 26.400000] br-lan: port 2(wlan0) entered forwarding state
[ 26.410000] br-lan: port 2(wlan0) entered forwarding state
ΓΏ
U-Boot 1.1.4-g33f82657-dirty (Sep 16 2013 - 16:09:28)
=====================================
CARAMBOLA2 v1.0 (AR9331) U-boot
http://www.8devices.com/-------------------------------------
DRAM: 64 MB
Flash: 16 MB
Net: eth0, eth1
=====================================
Hit ESC key to stop autoboot: 0
## Booting image at 9f050000 ...
Image Name: MIPS OpenWrt Linux-3.7.9
Created: 2014-01-03 12:44:12 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 965723 Bytes = 943.1 kB
Load Address: 80060000
Entry Point: 80060000
Verifying Checksum at 0x9f050040 ...OK
Uncompressing Kernel Image ... OK
My /etc/config/wireless looks as follows:
config wifi-device radio0
option type mac80211
option channel 11
option hwmode 11ng
option macaddr c4:93:00:00:b2:e5
option htmode HT20
list ht_capab SHORT-GI-20
list ht_capab SHORT-GI-40
list ht_capab RX-STBC1
list ht_capab DSSS_CCK-40
option disabled 0
config wifi-iface
option device radio0
option network lan
option mode ap
option ssid Carambola2
option encryption none
In client mode WIFI does work. I am running v2.5 I downloaded from the 8devices website.
Regards
Petrus Du Toit