I am not sure if my Caramabola2 is bootting properly. I plugged the carambola devboard into my laptop's USB board and the only LEDs that are lit are the Green LEDs of both ethernet jacks. Are there any other activity LEDs? I also don't see any SSID in my list of wifi SSIDs that coorespond to the Carambola2. Is there a "getting started" guide for the Carambola2? I see a guide on wiki for the Carambola, but not the Carambola2.

Hi,

try to connect with the console via putty (if you use windows). After connecting you have to press "Enter" to enable the console output in your putty window. If you booted your device the first time, there is no wireless lan configured.

Another option is to connect your PC or laptop with the eth0-port of the carambola. You can access the device via ssh on ip 192.168.1.1, Port 22.

As crackhe4d has already mentioned, the wifi is disabled by default. And so is ssh... On the first run you should be able to access the device only by serial console (USB) or telnet. SSH is automatically enabled once you set root password. So I'm wondering, did you do anything before connecting to ssh?

Yeah, you can do that too. Is everything running fine now?

Yes, my Carambola2 is working as expected