Hello Friends,
I wanted to change settings of wireless and build the image and load the firmware. So what i did is, i created a file on this path carambola2_Release_1.2.0/files/etc/config/wireless .
Now when i load the image i can see the file on carambola2 as addition of two files.
1) The one i created above on this path carambola2_Release_1.2.0/files/etc/config/wireless .
2) The other part i guess comes from "build_dir/target-mips_r2_uClibc-0.9.33.2/linux-ar71xx_generic/compat-wireless-2013-02-22/ipkg-ar71xx/kmod-cfg80211/lib/wifi/mac80211.sh"
On two different carambola2 development board, I can see two different things.
In one I only see the file from this carambola2_Release_1.2.0/files/etc/config/wireless and on other I can see /etc/config/wireless file to be addition of both the file mentioned above.
I have attached the file i want to have wirelless configuration to on default state of board.
| Attachments: |
File comment: This is the file carambola2_Release_1.2.0/files/etc/config/wireless
wireless.TXT [595 Bytes]
Downloaded 338 times |