| 8devices Community https://www.8devices.com/community/ |
|
| UART even parity really broken? https://www.8devices.com/community/viewtopic.php?f=13&t=948 |
Page 1 of 1 |
| Author: | berndocklin [ 10 Jun 2016, 14:32 ] |
| Post subject: | UART even parity really broken? |
Is the ar9331 UART even parity really broken without any workaround available? Odd and no parity work but setting even parity will just trigger odd parity. I know this has come up in the past and there are some hints in openwrt mailing lists - but didn't find any solution or workaround or a final confirmation that its really broken beyond repair. The serial driver looks reasonable and seems to be setting the correct flags. Likely a hardware issue. My issue is that the micro controller I am talking to only supports 8E1 on UART to use its bootloader. Thanks Bernd |
|
| Author: | gedass [ 15 Jun 2018, 05:41 ] |
| Post subject: | Re: UART even parity really broken? |
Fixed https://github.com/8devices/openwrt-8de ... ed0c98ea7c[ |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|