| 8devices Community https://www.8devices.com/community/ |
|
| Carambola2 INDUSTRIAL module https://www.8devices.com/community/viewtopic.php?f=13&t=982 |
Page 1 of 1 |
| Author: | docbee [ 09 Jan 2017, 22:46 ] |
| Post subject: | Carambola2 INDUSTRIAL module |
Two questions around this. 1) Do Carambola2 industrial and commercial modules share same FCC ID? 2) is there a way to find out via software if a industrial vs commercial version of the module is used? Do they have distinct MAC ranges, for example? If yes, which? |
|
| Author: | gedass [ 10 Jan 2017, 08:04 ] |
| Post subject: | Re: Carambola2 INDUSTRIAL module |
Hi, 1.Yes 2. Check label. Software is same for C-temp and I-temp. In case you want to check by MAC, then need to know when Carambola's were purchased, so that we could check with factory which range was used for I-temp version. |
|
| Author: | docbee [ 13 Feb 2017, 00:05 ] |
| Post subject: | Re: Carambola2 INDUSTRIAL module |
The industrial modules I currently use all seem to be from MAC range C4:93:00:07:7x:xx. I think it would be great if you could provide a list of MAC ranges of the industrial versions, so that SW developers can distinguish those from the commercial ones. I hoped that you would have defined a completely separate MAC range for those, but this does not seem to be the case, which makes it a bit more difficult. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|