| 8devices Community https://www.8devices.com/community/ |
|
| USB2Can, sniffing https://www.8devices.com/community/viewtopic.php?f=16&t=1078 |
Page 1 of 2 |
| Author: | SPlatten [ 20 Nov 2017, 13:02 ] |
| Post subject: | USB2Can, sniffing |
I have an Audi A5 2012, I recently purchased a CANLogger 2000 with ODBII cable to try and sniff CANbus packets. The device would not auto detect the bit rate, so on advice from the supplier I edited the configuration and set the bit rate to 500Kbps. However still no activity logged. The supplier then suggested that I may have to poll for the data. At this point I packaged it back up and sent it back to the supplier. I am now thinking of purchasing a USB2CAN adapter to do the same, can I simply connect one of these to the ODBII port and sniff the bus for packets? I want to capture the following, packets when brakes are used, left / right indicators, reverse and lights. Is this possible? Thank you for any assistance. Simon |
|
| Author: | gedass [ 20 Nov 2017, 13:19 ] |
| Post subject: | Re: USB2Can, sniffing |
USB2CAN is CAN bus <-> USB converter only.You need additional software for logging and sniffing. |
|
| Author: | SPlatten [ 20 Nov 2017, 13:48 ] |
| Post subject: | Re: USB2Can, sniffing |
Thank you, any suggestions? |
|
| Author: | gedass [ 20 Nov 2017, 15:06 ] |
| Post subject: | Re: USB2Can, sniffing |
SocketCAN for example |
|
| Author: | SPlatten [ 20 Nov 2017, 15:58 ] |
| Post subject: | Re: USB2Can, sniffing |
I'm using iOS (High Sierra) is there support for iOS on both USB2Can and SocketCan ? |
|
| Author: | gedass [ 20 Nov 2017, 17:39 ] |
| Post subject: | Re: USB2Can, sniffing |
Linux only |
|
| Author: | SPlatten [ 20 Nov 2017, 20:07 ] |
| Post subject: | Re: USB2Can, sniffing |
Ok, which distribution, I can set-up a virtual machine. |
|
| Author: | SPlatten [ 18 Dec 2017, 12:50 ] |
| Post subject: | Re: USB2Can, sniffing |
Since my last visit I've now got USB2CAN module installed correctly and running on Ubuntu. I've connect the laptop to my car via the USB2CAN module and the cable I purchased for this purpose. I've tried using "cansniffer" and Kayak, but I don't see any activity at all...I setup the bitrate to be 500000, can anyone help me to get going? |
|
| Author: | SPlatten [ 20 Jan 2018, 07:55 ] |
| Post subject: | Re: USB2Can, sniffing |
Would the device work on a virtual machine that is running Linux or Windows? |
|
| Author: | rootadmin [ 22 Jan 2018, 17:15 ] |
| Post subject: | Re: USB2Can, sniffing |
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|