Hello,

I'm using USB2CAN for testing an our project.
I'm experiencing some issue when I select 100Kbit/sec standard frame.
The output from USB2CAN seems not correct.
If I select 125K or other bit rate everithing is fine.
Any suggestion?

Hi,
try to use custom configuration "tseg2,seg1,sjw,brp" values:

long CanalOpen( const char *pConfigStr, unsigned long flags )
Opens a CAN channel.
pConfigStr
Physical device to connect to. This is theplace to add device specific parameters and filters/masks. This is a text string. It can be a
name, some parametersor whatever the interface creator chooses.The string for usb2can device constists of serial number,can bus
speed,mask,filter.Mask and filter can beomited. ***
Example:
ED123456; 125; 0x12345678 ; 0x98765432
ED123456; 1000
for custom CAN bus speed:
ED123456; 0 ; tseg2; tseg1; sjw ; brp ; mask ; filter ***
ED123456; 0 ; tseg2; tseg1; sjw ; brp

I read the pdf guide about the canal api, but there are no examples about the function and i'm not sure i'm doing well.