Hello!

I got the Rambutan-DVK kit, but I have an issue with Wi-Fi interface. In initial state of kit it is not working. Web interface informed me that “Wireless is disabled or not associated”. If i use the console, the “ifconfig” command reports to me: “br-lan, eth0, eth1 and lo”.

and
"
iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
eth0 no wireless extensions.
br-lan no wireless extensions. ».
"
Where is the wireless interface?

For the next step i tried to update the firmware, but i got one more fail. When i executed the “./build.sh rambutan” script, next errors had been reported:
“Checking out files from the git repository...
Cloning into 'mtd-utils-1.5.2'...
fatal: unable to connect to git.infradead.org:
git.infradead.org[0: 65.50.211.133]: errno=Connection refused
git.infradead.org[1: 2001:1868:a000:17::133]: errno=Network is unreachable”

This questions are important for me now:
1) Why wireless interface are not worked?
2) Can i fix this problem with a new firmware?
3) Why i can not update the firmware?

Lot of thanks! I will wait your answers!

Hi,
enable WiFi in '/etc/config/wireless' file

Thanks a lot. I used your recommendation, but i receive message "'/etc/config/wireless' is read only".
As can i make system read/write?

I understood. Settings could change in "/overlay/upper/".
I change setting for wireless
"
root@Rambutan:/# cat /overlay/upper/etc/config/wireless

config wifi-device 'radio0'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'platform/qca955x_wmac'
option htmode 'HT20'
option disabled '0'

config wifi-iface
option device 'radio0'
option network 'lan'
option mode 'ap'
option encryption 'none'
option ssid 'Rambutan'
"
but wi-fi as before do`t visible.
Yes, i made reboot device .
What am i missing?

Hi,
can you post your issue here:
https://github.com/8devices/openwrt-8devices/issues
?