| 8devices Community https://www.8devices.com/community/ |
|
| Lima Hardware Bootstrap Options https://www.8devices.com/community/viewtopic.php?f=23&t=1074 |
Page 1 of 1 |
| Author: | jtbeck [ 24 Oct 2017, 19:10 ] |
| Post subject: | Lima Hardware Bootstrap Options |
The Lima datasheet shows that there are several pins which must be set low at the time reset is deasserted in order for the module to boot properly. However I have looked at the evaluation board reference schematic and don't seem to see where anything enforces this. Is this something done already on the module even though the datasheet really is implying it must be done by the user? Thanks, JB |
|
| Author: | gedass [ 25 Oct 2017, 04:54 ] |
| Post subject: | Re: Lima Hardware Bootstrap Options |
All correct boostraps levels are set in Lima module.You don't need additional setting in motherboard. |
|
| Author: | jtbeck [ 26 Oct 2017, 19:56 ] |
| Post subject: | Re: Lima Hardware Bootstrap Options |
Excellent. Thanks for your help. Do you know if this also applies to the Carambola2? |
|
| Author: | gedass [ 27 Oct 2017, 09:57 ] |
| Post subject: | Re: Lima Hardware Bootstrap Options |
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|