| 8devices Community https://www.8devices.com/community/ |
|
| Debrick Lime Board https://www.8devices.com/community/viewtopic.php?f=23&t=1145 |
Page 1 of 1 |
| Author: | sivakumar [ 16 Aug 2018, 05:58 ] |
| Post subject: | Debrick Lime Board |
Hi All, I am trying to debrick couple of the Lima boards that we have got. The bootloader in these boards seems to have been corrupted. I sense that the only way to bring them back to life is by flashing the bootloader using the JTAG interface. I came across a post in the internet where someone had explained the procedure to debrick an AR71 using the openOCD. I couldn't try this because I dont have a parallel port in my laptop. I did try openOCD with a JLink interface but I was not able to make any communication with the device. Jlink doesn't seem to support the MIPS24 kc. What are the other viable options that I have? If there are any other external debugger's required then we are ready to procure it as our custom board with QCA4531 will go into production very soon. I have come across the JTAG Debuggers USB2WIGGLER for MIPS (Macraigor Systems) which I feel should work with Lima but would like to hear an expert opinion before going ahead and buying it. Thanks/Siva |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|