Hello
present my carambola2 board brctl is assigned to eth0. i need to change brctl to eth1.in that board hardware configuration ethernet1 is configured to the ethernet(LAN) cable.
in boot log message showing etho assigned to the ethernet port i.e lan cable.
but my aim is wifi brctl is assigned to the eth1, and eth0 is used for ethernet port
how can i change brctl eth0 to eth1
https://drive.google.com/file/d/1rFxuQM … sp=sharing
https://drive.google.com/file/d/1uDti-y … sp=sharing
when i plug ethernet cable in carambola2 board. eth0 is assisgned for the ethernet cable .
where can i change bridge is assigned to eth1
www.8devices.com
