Hi All,

i have some problems with the usb connection. I have tested five brand new carambola modules. I put them in the evalboard when a usb-webcam (or usb-mouse) is connected.
Then i switch on the modul and the bootconsole starts. During the boot i get on tree modules the error message 'dwc_otg: Device Not Supported' (ifinit times) on the two other modules
there is no error and the usb device is detected.

Wenn i start the 'error boards' with no usb devise plugged in, it starts normally without errors. Whenn the openWRT is running and then i plugged in the usb device
there is no reaction, to the usb-device (no detection).

Where is the error?
The five modules are direct, from the packet, from 8devices, with all the same firmware.

I attach the logdata from booting.


carambolage