www.8devices.com
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Carambola 2 - supply voltage tolerance
Author |
Message |
FPeter
Joined: 21 Aug 2013, 21:21 Posts: 101
|
Hi All!
Specs of Carambola 2 states that supply voltage is 3.3V. Are there anything on the 3.3V line that not tolerates up to 3.6V? Based on their documentations, the flash is 2.7-3.6V tolerant, VDD33 line of AR9331 is 2.97-3.63V tolerant, DDR2 chip runs from 1.8V so it doesnt matter...
Im planning to connect a SIM5320E USB 3G modem to this board (via USB 2.0 Hi-Speed hub due to hw bug, and i need more ports too), but this modem runs from 3.4-4.2V, so the common supply voltage would be ideal somewhere between 3.5 and 3.6V - if the Carambola 2 module tolerates it...
Best regards, Peter
|
21 Aug 2013, 21:59 |
|
|
gedass
Joined: 07 Dec 2011, 16:01 Posts: 525 Location: Lithuania
|
Hi, you can connect power supply to Carambola via 1 or 2 1A diodes.
|
22 Aug 2013, 08:26 |
|
|
FPeter
Joined: 21 Aug 2013, 21:21 Posts: 101
|
|
22 Aug 2013, 11:23 |
|
|
gedass
Joined: 07 Dec 2011, 16:01 Posts: 525 Location: Lithuania
|
Then use additional 3.3V DC/DC only for Carambola module if you want to have professional solution.
|
22 Aug 2013, 14:47 |
|
|
FPeter
Joined: 21 Aug 2013, 21:21 Posts: 101
|
|
22 Aug 2013, 21:56 |
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|