Hi All,

I am trying to debrick couple of the Lima boards that we have got. The bootloader in these boards seems to have been corrupted. I sense that the only way to bring them back to life is by flashing the bootloader using the JTAG interface.

I came across a post in the internet where someone had explained the procedure to debrick an AR71 using the openOCD. I couldn't try this because I dont have a parallel port in my laptop. I did try openOCD with a JLink interface but I was not able to make any communication with the device. Jlink doesn't seem to support the MIPS24 kc.

What are the other viable options that I have? If there are any other external debugger's required then we are ready to procure it as our custom board with QCA4531 will go into production very soon.

I have come across the JTAG Debuggers USB2WIGGLER for MIPS (Macraigor Systems) which I feel should work with Lima but would like to hear an expert opinion before going ahead and buying it.

Thanks/Siva