8devices Community https://www.8devices.com/community/ |
|
New LIMA devices not booting https://www.8devices.com/community/viewtopic.php?f=23&t=1206 |
Page 1 of 1 |
Author: | jstep [ 02 Jan 2019, 15:24 ] |
Post subject: | New LIMA devices not booting |
Hello, We have our own developed carrier board which includes a LIMA, however the LIMA does not boot. When monitoring the UART upon toggling the RESETN we can see the bootloader start, and then it hangs after displaying the following: """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""" U-Boot 1.1.4-gefc36cf5 (May 25 2018 - 13:19:10) ================================ Caraboot v2.7 (QCA9531) U-boot http://www.8devices.com/ ------------------------------------------ DRAM: 4 MB | """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""" Do you have any suggestions to what may be causing this? Thanks Joe |
Author: | pepe2k [ 02 Jan 2019, 16:59 ] |
Post subject: | Re: New LIMA devices not booting |
Make sure GPIO_10/UART TX isn't pulled up on your carrier board. As it's used for DRAM type (DDR1/2) detection, it has to be pulled down during bootstrap stage (first ~5 ms). |
Author: | jstep [ 03 Jan 2019, 13:22 ] |
Post subject: | Re: New LIMA devices not booting |
Thank you, this answer pointed us to the problem. |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |