| 8devices Community https://www.8devices.com/community/ |
|
| carambola2 change ethernet eth0 to eth1 https://www.8devices.com/community/viewtopic.php?f=7&t=1080 |
Page 1 of 1 |
| Author: | amarr mandha [ 23 Nov 2017, 11:55 ] |
| Post subject: | carambola2 change ethernet eth0 to eth1 |
Hello present my carambola2 board brctl is assigned to eth0. i need to change brctl to eth1.in that board hardware configuration ethernet1 is configured to the ethernet(LAN) cable. in boot log message showing etho assigned to the ethernet port i.e lan cable. but my aim is wifi brctl is assigned to the eth1, and eth0 is used for ethernet port how can i change brctl eth0 to eth1 https://drive.google.com/file/d/1rFxuQM … sp=sharing https://drive.google.com/file/d/1uDti-y … sp=sharing when i plug ethernet cable in carambola2 board. eth0 is assisgned for the ethernet cable . where can i change bridge is assigned to eth1 |
|
| Author: | amarr mandha [ 23 Nov 2017, 12:30 ] |
| Post subject: | Re: carambola2 change ethernet eth0 to eth1 |
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|