8devices Community https://www.8devices.com/community/ |
|
PIC Programmer / Offload time critical parts to a PIC18F https://www.8devices.com/community/viewtopic.php?f=8&t=571 |
Page 1 of 1 |
Author: | Gerd [ 09 Sep 2013, 23:32 ] |
Post subject: | PIC Programmer / Offload time critical parts to a PIC18F |
This may be of your interest: https://github.com/GBert/openwrt-files The PIC programmer is used to program a PIC18F microcontroller, which could be used for hard realtime stuff or get other peripheral connected (e.g. CAN, RS485 etc) to your Carambola. A sort of Big/Little concept: Carambola CPU and a little MCU. The intention is not another PIC programmer. I just wanted a CAN interface and doing other things without the need of a separate programmer even on updates of the PIC code. If you want to waste some spare flash on your Carambola you could even use to write code for your PIC18 direct on your Carambola. Just install jalv2 if you like to (script/feeds install jalv2). Regards, Gerd |
Author: | impulseB [ 10 Sep 2013, 11:34 ] |
Post subject: | Re: PIC Programmer / Offload time critical parts to a PIC18F |
Very nice. (y) |
Author: | Gerd [ 13 Oct 2014, 09:31 ] |
Post subject: | Re: PIC Programmer / Offload time critical parts to a PIC18F |
Author: | FPeter [ 13 Oct 2014, 11:29 ] |
Post subject: | Re: PIC Programmer / Offload time critical parts to a PIC18F |
nice job, but in most cases, if You already have a PIC programmer for Your PC, then a bootloader via UART / USB / I2C / SPI / CAN / etc would be easier way for openwrt |
Author: | Gerd [ 13 Oct 2014, 12:20 ] |
Post subject: | Re: PIC Programmer / Offload time critical parts to a PIC18F |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |