www.8devices.com
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Problem running test app in Windows 7 64-bit
Author |
Message |
andrewtaneglen
Joined: 07 May 2014, 01:53 Posts: 4
|
Hi,
I have a USB2CAN ED000204 which I have been using with no problems under linux, but I cannot get it to work in windows.
I downloaded and installed the Win7 64-bit drivers and the device appears properly in the device manager.
I then downloaded and ran the test app 'usb2canTestApp_1_0' and following a previous post changed the 'ED000000' portion of the device string to 'ED000204', then clicked 'Open'.
The test application then locks up with 'Not Responding' displayed in the title bar of the form. The status led on the device does, however, change from red to solid green at this point, indicating that something is working, but the windows app remains unresponsive.
Is there anything I could try to get around this?
Regards, Andrew Glen.
|
07 May 2014, 02:03 |
|
|
gedass
Joined: 07 Dec 2011, 16:01 Posts: 525 Location: Lithuania
|
Hello, upgrade USB2CAN converter firmware up to 1.5version. 1.4ver works under only 32bit win and 64bit old versions.
|
07 May 2014, 07:37 |
|
|
andrewtaneglen
Joined: 07 May 2014, 01:53 Posts: 4
|
Thank You. That fixed it!.
|
07 May 2014, 20:56 |
|
|
vedikaledange
Joined: 05 Feb 2019, 11:13 Posts: 2
|
Upgrading USB2CAN will help you testing successfully.
|
06 Feb 2019, 05:33 |
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: No registered users |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|