Mango
Mango system on module (SOM) is based on IPQ-6010 SoC from Qualcomm, which incorporates a powerful quad-core ARM Cortex A53 processor with NEON SIMD DSP extension for each core, ideal for Routers, Gateways and Access Points. It comes with a high-power dual- band concurrent radio supporting WIFI 6 (802.11ax) technology 2x2 MiMo. Two Ethernet SerDes to connect to external multi-GbE PHYs. Advanced power management for low active standby power consumption. SOM supports one USB3.0, USB2.0, PCIe 3.0, miscellaneous interfaces, which can be configured as general-purpose I/O pins and other. SoC has hardware NAT engine and high-end security features like crypto engine and others. The module is in a surface mountable form. Commercial temperature range: 0-65°C, industrial temperature range: -40-85°C.
Buy Mango Buy Mango-I Buy Mango-DVK
Based on Qualcomm’s IPQ-6010 CPU (Cypress)
Industrial temperature version is available for applications requiring extended temperature range
Quad-core 1.8GHz A53 ARM CPU
Neon FPU and secure boot
Dual-band 2x2 MiMo concurrent radio
1.5+ Gbps data-rate and 1.4 Gbps over the air throughput
2.5G (up to 2) and 1G (up to 5) Ethernet interfaces
4 download and upload OFDMAs
Multiple boot options: SPI NOR/NAND, Parallel NAND, eMMC, SD
Many peripheral interfaces: USB3.0/2.0, I2S/ TDM, SPDIF, PWM, GPIOs
Development board details
- UART header
- GPIO header
- Configuration switch
- USB 3.0 interface
- DC power supply 9-60V
- 2.5 Gbps ETH interface + POE passive 24-48V
- SFP Port
- 2x ETH 1Gbps interface
- WiFi antenna 1 and U.FL
- WiFi antenna 2 and U.FL connector for external antenna
- SD card socket
- EMMC module socket
- mPCIE socket with PCIe3.0, USB2.0 interfaces
- Programmable button (GPIO79)
- Reset button
- LEDs
- Mounting holes
1024QAM constellation diagram done with Litepoint IQxel-MW 7G Wi-Fi test system
IPQ6000 platform OTA throughput test results
Need Wi-Fi 6?
8devices is a Qualcomm ADC (authorized design center) with many years of experience in hardware and embedded software development. Our Fast Track product design program has helped many companies to get their products out in the market quickly and effectively.
We can get involved in any product design phase, from the project planning to prototyping and even mass production. No matter if it is a daughterboard with your specific requirements and interfaces or a fully custom hardware design, we are here to help.